Support & Troubleshooting


Ember Stuck after Update (4)
Pause Print; Insert Piece; Resume Print (9)
Exposure amount vs Exposure time question (8)
Printing 50 micron X/Y resolution (15)
Support completely merged with the part (4)
Ember wont turn on (2)
Resin tray jammed - Manually rotate the resin tray plate (4)
Printing Encapsulated Pores (4)
Limitation for diameter/height ratio when printing cylinder (4)
Resin tray jams as soon as print starts (16)
Vat jamming (10)
Playing with different support settings (16)
Resin (4)
Print Studio not working (17)
Searching for accurate Z-dimension prints (4)
Obtaining grayscales in the XY plane (6)
Printer Calibration ( 2 ) (31)
Remove objects printed on build platform (6)
Tray rotates the wrong direction when starting a print (3)
EMber is not printing (11)
Discrepancies between printsettings text file and Print Studio advanced setting (6)
Effect of IPA bath in print resolution (5)
Print Studio - print database error (10)
Colorado Polymer Solutions Website (6)
Aliasing vs Anti-Aliasing (1)
Lines in the prints (11)
Micro Structures (0.11mm / 0.004") not printing perpendicular to build head (5)
Cannot print out my part ( 2 ) (24)
Adding resin mid-print: good or bad? (4)
Microhairs (8)